• Slide 1
  • Slide 2
  • Slide 3
  • Slide 4
  • Slide 5

About Us

Iranpitch Co. was founded in 1986 in Yazd. Due to our expansion program, our factory was moved to Yazd's Special Economic Zone in 2018 and expanded our production facilities such as progressive cold formers , continuous heattreating line , de-oiling , de-phosphating line and finally Geomet coating . Our production capacity is increased to 12,000 M/T in house. Our main products are standard screws , fasteners for automotive industry and mainly in steel structure for high strength structural bolting assemblies for preloading in the complete range for EN14399-3 , EN14399-4 and EN14399-10. the process is cold-formed. One of the most advantages of Iranpitch is the back ground and experience of human resources during past years for controlling K factor on preloaded bolting assemblies. Thanks to NOF metal coating group which Iranpitch has the licency for Geomet coating on fasteners. Besides , ISO9001/2015 , IATF16949;2016 certificates are implied in Iranpitch as quality management system. Iranpitch laboratory succeeded to gaining ISO/IEC 17025:2017 certificate from NACI Due to controlling the mechanical properties and correct heat treatment for steel structure , nuts assembled with Iranpitch bolts are heattreated in house. (Requirement of EN14399-2).High strength structural bolting assemblies for preloading delivered to en users with certificate containing .required torque for pre loading

Learn More

Products

Hexagon Soket Head Cap Screws

Details
Category: Products
Hits: 11785
Thread Size M8 M10 M12 M14 M16
d M8x1 M10x1.5 M12x1.5 M14x1.5 M16x1.5
p 1.25 1.5 1.75 2 2
b 28 32 36 40 44
ds min 7.78 9.78 11.73 13.73 15.73
dk min 13 16 18 21 24
t min 4 5 6 7 8
s 6 8 10 12 14
e min 6.86 9.15 11.43 13.72 16

Hexagon Head Screw:EN ISO 4017

Details
Category: Products
Hits: 11185
d M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30
p 1.25 1.5 1.75 2 2 2.5 2.5 2.5 3 3 3.5
k 5.3 6.4 7.5 8.8 10 11.5 12.5 14 15 17 18.7
s 13 17 19 22 24 27 30 34 36 41 46
a max 3.75 4.5 5.25 6 6 7.5 7.5 7.5 9 9 10.5
L 30-60 30-60 30-60 30-80 30-100 50-100 50-100 50-100 50-100 50-100 50-100

Hexagon Head Bolt: EN ISO 4014

Details
Category: Products
Hits: 11661
d M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30
p 1.25 1.5 1.75 2 2 2.5 2.5 2.5 3 3 3.5
b(1) 22 26 30 34 38 42 46 50 54 60 66
b(2) 28 32 36 40 44 48 52 56 60 66 72
dw min 11.6 15.6 17.4 20.5 22.5 25.3 28.2 31.7 33.6 38 42.7
c min 0.15 0.15 0.15 0.15 0.2 0.2 0.2 0.2 0.2 0.2 0.2
k 5.3 6.4 7.5 8.8 10 11.5 12.5 14 15 17 18.7
s 13 17 19 22 24 27 30 34 36 41 46
L 35-120 40-120 45-120 50-120 50-120 60-180 60-180 60-180 70-180 90-180 90-180

EN14399-4 SYSTEM HV

Details
Category: Products
Hits: 11802

اتصالات پیچ و مهره ای در پل ها و سازه های فولادی بلند مرتبه که در معرض تنش های لغزشی و برشی قرار دارند باید توسط پیچ های پر مقاومت با سر شش گوش (بزرگتر از معمول) ، ساخته شده طبق استاندارد فوق ، به یکدیگر متصل گردند. نیروی گشتاور مورد لزوم به منظور ایجاد حداقل نیروی پیش تنیدگی لازم روی پیج که از الزامات استاندارد فوق می باشد. در آزمایشگاه شرکت ایران پیچ توسط دستگاه Tension Calibrator محاسبه و بر روی گواهی نامه یا کارتن های مربوطه درج می گردد.

 

محدوده تولیدات : M12 تا M30 تا حداکثر طول 250mm

 

 

Thread d M12 M16 M20 M22 M24 M27 M30 M36
l Ʃ tmin and Ʃ tmax
nom. min. max. min. max. min. max. min. max. min. max. min. max. min. max. min. max. min. max.
35 33,75 36,25 16 21                            
40 38,75 41,25 21 26 17 22                        
45 43,75 46,25 26 31 22 27 18 23                    
50 48,75 51,25 31 36 27 32 23 28 22 27                
55 53,5 56,5 36 41 32 37 28 33 27 32                
60 58,5 61,5 41 46 37 42 33 38 32 37 29 34            
65 63,5 66,5 46 51 42 47 38 43 37 42 34 39            
70 68,5 71,5 51 56 47 52 43 48 42 47 39 44 36 41        
75 73,5 76,5 56 61 52 57 48 53 47 52 44 49 41 46 39 44    
80 78,5 81,5 61 66 57 62 53 58 52 57 49 54 46 51 44 49    
85 83,25 86,75 66 71 62 67 58 63 57 62 54 59 51 56 49 54 43 48
90 88,25 91,75 71 76 67 72 63 68 62 67 59 64 56 61 54 59 48 53
95 93,25 96,75 76 81 72 77 68 73 67 72 64 69 61 66 59 64 53 58
100 98,25 101,75     77 82 73 78 72 77 69 74 66 71 64 69 58 63
105 103,25 106,75     82 87 78 83 77 82 74 79 71 76 69 74 63 68
110 108,25 111,75     87 92 83 88 82 87 79 84 76 81 74 79 68 73
115 113,25 116,75     92 97 88 93 87 92 84 89 81 86 79 84 73 78
120 118,25 121,75     97 102 93 98 92 97 89 94 86 91 84 89 78 83
125 123 127     102 107 98 103 97 102 94 99 91 96 89 94 83 88
130 128 132     107 112 103 108 102 107 99 104 96 101 94 99 88 93
135 133 137         108 113 107 112 104 109 101 106 99 104 93 98
140 138 142         113 118 112 117 109 114 106 111 104 109 98 103
145 143 147         118 123 117 122 114 119 111 116 109 114 103 108
150 148 152         123 128 122 127 119 124 116 121 114 119 108 113
155 153 159         128 133 127 132 124 129 121 126 119 124 113 118
160 158 164             132 137 129 134 126 131 124 129 118 123
165 163 169             137 142 134 139 131 136 129 134 123 128
170 168 174                 139 144 136 141 134 139 128 133
175 173 179                 144 149 141 146 139 144 133 138
180 178 184                 149 154 146 151 144 149 138 143
185 182,7 189,6                 154 159 151 156 149 154 143 148
190 187,7 194,6                 159 164 156 161 154 159 148 153
195 192,7 199,6                 164 169 161 166 159 164 153 158
200 197,7 204,6                     166 171 164 169 158 163
NOTE : The popular lengths are defined in terms of length Ʃ tmin and Ʃ tmax
a : For proper function of the preloaded bolted joint the following condition for the clamp length lt shall be fulfilled :
(lg, max + 2P) < Ʃt < (lmin - P - mmax), where P is the pitch of thread and mmax is the maximum nut height accotding to table 4.
The values of Ʃ tmin and Ʃ tmax specified in table A. 1 are within this range.
The Ʃ tmax values are specified on the condition that the minimum bolt protrusion beyond the unloaded nut face shall be 1P.

 

 

Dimension of Nuts a

Thread d M12 M16 M20 M22 M24 M27 M30 M36
Pd 1,75 2 2,5 2,5 3 3 3,5 4
da max. 13 17,3 21,6 23,7 25,9 29,1 32,4 38,9
min. 12 16 20 22 24 27 30 36
dw max. c c c c c c c c
min. 20,1 24,9 29,5 33,3 38,0 42,8 46,6 55,9
e min. 23,91 29,56 35,03 39,55 45,20 50,85 55,37 66,44
m nom = max. 10 13 16 18 20 22 24 29
min. 9,64 12,3 14,9 16,9 18,7 20,7 22,7 27,7
mw min. 7,71 9,84 11,92 13,52 14,96 16,56 18,16 22,16
s max. 22 27 32 36 41 46 50 60
min. 21,16 26,16 31 35 40 45 49 58,8

a For hot-dip galvanized nuts, the dimensions apply before galvanizing.
b P is the pitch of thead.
c dw, max. = sactual

 

 

Dimensions

Normal size
d
(nominal thread
diameter of
associated bolts)		 12 (14)a 16 (18)a 20 22 24 27 30 36
d1 min. 13 15 17 19 21 23 25 28 31 37
max. 13,27 15,27 17,27 19,33 21,33 23,33 25,33 28,52 31,62 37,62
d2 min. 23,48 27,48 29,48 33,38 36,38 38,38 43,38 49 54,80 64,80
max. 24 28 30 34 37 39 44 50 56 66
h nom. 3 3 4 4 4 4 4 5 5 5
min. 2,7 2,7 3,7 3,7 3,7 3,7 3,7 4,4 4,4 5,4
max. 3,3 3,3 4,3 4,3 4,3 4,3 4,3 5,6 5,6 6,6
e nom. = min. 0,5 0,5 0,75 0,75 0,75 0,75 0,75 1 1 1,25
max. 1 1 1,50 1,50 1,50 1,50 1,50 2 2 2,50
c min. 1,6 1,6 1,6 2 2,0 2,0 2,0 2,5 2,5 2,5
max. 1,9 1,9 1,9 2,5 2,5 2,5 2,5 3,0 3,0 3,0

NOTE : For hot dip galvanized washers the above dimensions apply prior to galvanzing.
a Sizes in brackets are non-preferred sizes.